BeHear by Alango are hearing aids that resemble earbuds. They also have BlueTooth for pairing with other devices
-For people with mild to moderate hearing loss
-Boost only the frequencies you want to hear
-Four different preset modes
-A dedicated app for your smartphone
-Rechargeable and last up to 12 hours
-Developed by sound engineers and audiologists
From the product website:
Using ListenThrough sound enhancement technology, which is a smart algorithm, the hearing product blocks out unwanted noises while still letting users engage with their environment. Additionally, the headsets use EasyListen technology to slow down speech up to a maximum-allowed delay to assist with messages or telephone speakers who are hard to understand.
The NOW Headset (Alango ABH-101) acts as a sound amplifier and can amplify sound in four different environments: Indoor, Outdoor, Crowd, and Live Music. The ACCESS Hearing Amplifier (Alango ABH-120) can amplify sound in the same way as the NOW, but the ACCESS uses Induction Loop Systems, which are found in some hearing aids and theaters, to cut out interference, reverberation, and background noise.
There is also the option of using the BeHear HearLink device with the BeHear NOW. The HearLink TV Transmitter sends audio from a TV with an analog audio out port directly to the BeHear Now Headset and supports low-latency audio streaming. The transmitter can also use AVRCP commands, such as play, pause, stop, etc., to effectively control the headset's audio. Because the TV link can use dual streaming, two BeHear headsets can be connected to the TV link at the same time.
Specs:
Electrical Specifications
Bluetooth:
Version 4.2, Class II
HFP 1.6, HSP 1.2, A2DP
Supported audio CODECs: SBC, aptX, aptX-LL
Range: 10m
Acoustic Performance:
Maximal Sound Pressure Level (OSPL90), HFA: 116 dB SPL
Full-on Gain, HFA: 42 dB
Total Harmonic Distortion (THD): < 0.7%
Receiver Specifications
Speaker: 13.6 mm receivers
Frequency Response: 20 Hz to 20 kHz
Microphone Specifications
Microphones (four in total):
Ultra low-noise 74 dB SNR ECM (Electret Condenser Microphone) in each earpiece
Low-noise digital 64 dB SNR MEMS in each control box
Frequency Response: 100 Hz to 15 kHz
Battery:
Rechargeable single cell Lithium Ion
Charging interface: Micro-USB
Capacity: 250mAh
Software Versions Supported by W&H BeHear App:
Android: Version 4.4 and up
iOS: Version 9 and up
Vibration Alerts (enabled/disabled using the BeHear NOW smartphone application, Settings menu):
Power On/Off
Bluetooth Pairing
Bluetooth Connection/Disconnection
Connecting to Charger
Incoming Call (synchronized with call tone)
Agency Approvals:
CE RED
FCC
TELEC
SRRC
NCC CCAN20LP0300T1