loading
reading
writing
saving
searching
Pioneer SX6000 receiver rare! 1972 - Silver face - $560 (Brooklyn)
QR Code Link to This Post
Serviced
LED light upgraded
Exellent FM reception
Partially re capped
All out of specs parts transistors resistors...was removed , new industrial grade parts installed.
All tested all works perfect.
Pioneer's Model SX-6000 puts together in one attractive package everything the Hi-Fi enthusiast would ever ask of a stereo receiver: power, FM sensitivity and selectivity, the versatility to handle multiple speaker systems or tape units, and advanced circuitry for low-noise music output and long-life stability and performance.
The basic performance specifications speak highly for themselves - and go a long way to show why this receiver is one of the finest ever made for its price.
You get peak music power output of 200 watts at 4 ohms (IHF), or 54 watts of continuous power per channel driven at 8 ohms.
You'll pull in even far-off fringe FM stations with the FET front-end and FM sensitivity that is rated at an exceptional 1.8 uV.
And you'll be able to handle up to three different speaker systems, a pair of tape decks, even two different turntables with this highly-advanced Pioneer unit.
No matter how you like your stereo, no matter how much you want from a receiver, the SX-6000 is going to make all the difference in the world for good music listening. Just listen.
Specifications
Tuning range: FM, MW
Power output: 36 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 1%
Damping factor: 65
Input sensitivity: 4mV (mic), 2.4mV (MM), 210mV (DIN), 210mV (line)
Signal to noise ratio: 80dB (MM), 90dB (line)
Output: 210mV (line), 37mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 5 x IC, 40 x transistors, 17 x diodes
Dimensions: 470 x 172 x 340mm