craigslist | tools in long island

Spartan Square One Stripping Compound (levittown) $1

2009-11-12T12:27:37-05:00

i have 3 full 5 gallons and a about 2 1/2 gallons left in the fourth container $20.00 each if you buy all three the 2 1/2 gallons is free
I took this right from the site. john (516)749-0636

Spartan Square One Stripping Compound - 5 Gallon Pail Size
0078-5; purple color, pleasant fragrance; non-viscous, low foaming, biodegradable, phosphate free; an extremely powerful stripping compound formulated exclusively to remove excessive long-term build-ups of floor finish and wax; the dual-solvent system quickly penetrates, re-emulsifies and suspends even the most highly burnished solids build-ups that can occur when repeated recoating and/or spray-buffing procedures are utilized.

Square One should never be used for daily maintenance or for routine stripping.

For a fast, effective deep stripping action, Square One's formula contains sodium hydroxide, an effective inorganic builder that increases the product's alkalinity and in effect, gives it extra "bite". Glycol ether, a powerful solvent, is incorporated to speed initial penetration. The unique blending of these primary ingredients create unusually fast penetration and re-emulsification of even the most highly burnished solids build-up, suspending both finish and soil in a detergent solution for easy removal.

Formulated with low foaming wetting agents to speed up the rinsing time. The low foaming characteristics coupled with the product's superior performance makes it excellent for use in automatic scrubbers.

Economical and a true concentrate, it may be diluted from 1:10 to 1:1 depending upon extent of wax or finish build-up, method of application, and contact time. The remarkably fast chemical action substantially reduces time and labor costs normally required for difficult stripping.

Wet Lines whole setup-best offer (Ronkonkoma)

2009-11-12T12:15:37-05:00

Wet Lines Whole set up everything you need to have a wet line system
alluminum tank
tank brackets
hoses
pump
control unit
everything New put on truck this past winter and used 10 times Have receipts from LI Truck Parts
any questions call 631-569-1882

welder Shindoiwa (Ronkonkoma) $7000

2009-11-12T12:10:59-05:00

Diesel welder
Kabuta motor
Model# DGW400 Weld / Generator
(2) men weld Capacity at the same time
Why have (2) machines when you only need one
(2) seperate controls
runs excellent Verrrrrrrrry Quite allot of power So quite you will wonder if it is running
for specs go to Shindoiwa website
call with any questions 631-569-1882
Asking 7,000 OBO
NEED TO SELL

gas saw Makita 14" (Nassau)

2009-11-12T11:50:13-05:00

Gas concrete saw
Makita 14"
$700

Jet Woodworking Equpit. (Nassau)

2009-11-12T11:46:07-05:00

Table Saw JTAS-10XL50-1 $1500
Drill Press JDP-17MF $350
Shaper JWS-18HO $400
all in perfect condition

Misc equipt 4 sale (Nassau)

2009-11-12T11:44:54-05:00

"A" frame ladders type 1A fiberglass / 6' / 8' / 10' / 12' starting at $100ea.
Porter Cable pneumatic nailers /Finish / Brad / Stapler / starting at $50ea.
DeWalt misc. 12" dual compound mitre saw / jig saws / cordless drills, recipricating saw, impact gun, circular saws.
Rigid thickness planer, drum sander, 10" mitre saw with laser / circular saws.
Binks conventional pressure pot sprayer with xtra long hoses.

Air Compressor "Porter Cable" with 50' flex hose (Lindenhurst, Long Island) $100

2009-11-12T09:48:20-05:00

Air Compressor "Porter Cable" pancake style compressor Model # C2006 with 50' flex hose
150 PSI ,,, 6 Galloon ,,, Oil Free ,,, 2 gun connector ,,,
In perfect operating condition

@@@@@@@SKID STEER (LINDENHURST)

2009-11-12T09:11:16-05:00

HYDRAMAC MODEL 1700D,JOHN DEER DIESEL 1400 HOURS 4 in 1 BUCKET NICE MACHINE GREAT FOR SNOW REMOVAL, LANDSCAPER OR EXPORT. HYDRAMAC THE ONLY GEAR DRIVEN SKIDSTEER.. CALL DON@ 631 888 8473 7am-3pm mon-fri

★SNAP ON TOOLSBATTERY LOAD TESTER6V 12V★ (★CAN DELIVER★) $50

2009-11-12T08:51:49-05:00

Here we have a 6V/12V Hand held tester for conventional and maintenance free batteries. Performs state of charge test, 125 amp battery load, and starter current draw test. Heavy duty insulated clamps with 300 amp jaws. Also includes built in adaptors for side post.
I paid $200 for it. Had it since new. Hasn't been used since I had it serviced by Snap On.

CELL/TXT (718)208-6712
PHONE (631)731-1709

!!!!!DIESEL GENERATORS 5-10 (LONG ISLAND)

2009-11-12T08:47:39-05:00

5KW 2 CYL AND 10 K 4CYL AIRCOOLED 3PHASE UNDER 100 HOURS WILL SELL WITH OR WITHOUT TRAILER CALL DON @ 631 888 8473 7am-3pm mon-fri

!!!DIESEL GENERATOR 60 KW (LONG ISLAND)

2009-11-12T08:46:22-05:00

60 k diesel generator 3 phase,1000 hours, 6cyl turbo diesel -Don @ 631 888 8473 7am-3pm m-f

@@@@@@3kw diesel generator (long island)

2009-11-12T08:44:49-05:00

3 kw military 110-220v 3 phase diesel generator with yanmar diesel. Electric or recoil start don 631 888 8473 7am-3pm m-f

KEROSENE HEATER, 85,000 BTU. (LONG ISLAND) $225

2009-11-12T08:29:38-05:00

THIS WILL HEAT YOUR GARAGE TO 90.
WORKS GREAT!

ALSO SO POSTED ON
New York City Classified Ads - Free Kijiji Classifieds in New York City

Wooden Ladders -- CHEAP! (Southwest Nassau County) $30

2009-11-12T07:18:25-05:00

4 wooden ladders; one is 13' the other three are 15'. Looks like they were originally two extension ladders but I'm selling the four separate pieces as is. $30 each or take them all for $100.

SDS DEMOLITION HAMMER USED ONCE (SUFFOLK) $625

2009-11-12T05:51:37-05:00

BOSCH SDS DEMOLITION HAMMER , USED ONCE, 18" FLAT CHISEL , 18" BULL POINT

$625.00

CALL 631-492-0150

MITER SAW 10" (SUFFOLK) $250

2009-11-12T05:49:10-05:00

HITACHI 10" MITER SAW , WITH STAND, REFURBISHED

$250.00

CALL 631-492-0150

plumbing (islip)

2009-11-11T23:06:10-05:00

Plumbing company going out of buisness. call 631-445-0345

Conduit benders (qty 5) $100.00 for all
Demo saw w/2 blades $200.00
Adjustable handthreader 1-2 inch $100.00
Rigid pipe cutters (2) $ 65.00 both
Milwaukee rotary hammer $150.00
Dewalt circular saw $50.00
Bosch chipping hammer $100.00
Porter cable 14v cordless drill set $50.00
porter cable sawzall $75.00
Makita chipping drill $75.00
Bosch bulldog rotary hammer $75.00
Aluminum pipe boxes (2) $50.00 both
Rotozip $35.00

JACK BAR (SHOREHAM) $25

2009-11-11T21:32:35-05:00

HEAVY DUTY JACK BAR-CARGO-STA. EXPANDS 85" TO 114". $25.00 EACH. I HAVE FIVE BARS.
(631)871-0480

Homelite 4400W generator (suff) $200

2009-11-11T20:19:42-05:00

4400w gen. carb needs to be cleaned sat for a year with old gas in it Ken 631-681-3856

New Chain Saw 18 Inch Craftsman (West Babylon) $100

2009-11-11T19:47:14-05:00

This is a new saw that was given to me, but I have no use for, it comes with a blow molded case.

Marlow Pump (Ridge) $180

2009-11-11T19:35:05-05:00

Pump with 3 HP Briggs & Stratton engine; Carry handle; Oil soaked air filter; On/off switch; Shrouded ignition wire & plug; Splash shield between engine & pump; 2" ever-tite fittings; 2" ball valve w/ever-tite and metal reinforced suction hose included; runs excellant

Ridgid gas air compressor (BRAND NEW) (wantagh) $650

2009-11-11T19:04:00-05:00

this model is brand new,duel air tanks,5.5 honda motor..... still has the sticker on it, 0 hours!!!! selling at home depo for 850 I want $650 NOT NEGO!!!! CALL MY PHONE.... DONT E-MAIL ME!!!!- 516 451 1869...jim

Delta 10" Table Saw (Islip) $650

2009-11-11T18:46:28-05:00

Delta 10" Table Saw in Excellent Condition, Model #36-979 , Includes Biesemeyer Fence, Link Belt, pals alignment system, and machined steel pulleys

http://www.in-lineindustries.com/performance_pack.html
http://www.in-lineindustries.com/saw_pals.html

Roof rippers (bayshore ) $10

2009-11-11T18:11:00-05:00

I have seven , used for one job
I also have 15 coils of 1 1/2 " nails $20
8' A frame ladder $125
Metal Garden rakes $5 ea
All negotiable must sell

Lincoln AC-225 Arc Welder (Long Island) $225

2009-11-11T18:02:32-05:00

Lincoln AC-225 Arc Welder for sale this was used Just to do one job selling for $225.00 you can contact 347-8809646 thanks no scammers thanks.

RADIAL ARM SAW (plainview) $200

2009-11-11T17:17:22-05:00

LIKE NEW
With metal base
Jim 516 933 8749

***WOW!!- Like New Radial Arm Saw with Stand.. (Select salvage, Hicksville) $249

2009-11-11T16:49:31-05:00

Selling this lightly used 10" Sears Craftsman Radial Arm Saw for $250.00 / OBO. INCLUDED WITH 10" RADIAL SAW GUARD KIT... This saw has been well taken care of and is very apparent when you see it. Also included is the Sears Craftsman Mobile base unit. Wired for 120V, 11/5.5 Amperes, Single Phase, 3450 RPM, 60 Hertz (cycles). I plug direct to my regular a/c plug in my garage and it works great. Very precise cuts and the yoke can be swiveled 90 degrees to make rip cuts and works like a tablesaw. Also included is the original Owners manual. select salvage co. 349 west john st.Hicksville, ny - 1 516 470 1960

A new unit very similar to this one from Sears is about 750.00...

Black & Decker Hedge Trimmer (Long Beach) $15

2009-11-11T15:52:23-05:00

Black &Decker Hedge Trimmer
Up for sale is a almost new Black & Decker 16" Hedge Trimmer. Used once. In original box.

Features a high output 2.6A motor with a lock-on switch that provides comfort when using the unit for extended periods of time. 16" single action blades effortlessly trims branches up to 3/8" at a rate of 3000 SPM. Built-in cord retainer reduces the chances of cord unplugging during operation. T-handle with secondary handle for comfort when trimming. Unit weight: 4.4 lb.

Alumapole (New) 2 - 24' Poles, 2 - Pump Jacks, 2 - Benches, 2 - Braces (Plainview) $999

2009-11-11T15:23:15-05:00

Don�t buy used equipment with no guarantees � Approved Ladder and Scaffolding has been serving the climbing community since 1954. We have just moved into our �New� 20,000 square foot warehouse located at 163 Dupont Street, Plainview, NY 11803. 1/8th mile off the L.I.E. at exit 46n (Sunnyside Blvd.) Not only are we the leaders in scaffold sales, rentals, erections/dismantles, we are also major distributors of Waco, Vanguard, Louisville, Bil-Jax, DBI Sala/Capital Safety, Titan Ladder and Staging, Alumapole, Strongman Building Products and Sinco Safety Netting. All our pricing and estimates are with our customer�s best interest in mind.

We have a great deal on a brand new alumapole package for all you contractors out there. 2 � 24� Poles (W/Mud Cap) 2 � Pump Jacks, 2 � Work Benches and 2 � Braces, all BRAND NEW for only $999.00. Everything you need to get you going on your next job for one great price.

We also have great pricing on 6�, 12� and 18� Poles, 6� Splice Joints and 22� Safety Netting. Any questions please call the shop 516-781-7310 and ask for Frank.

Note � This sale price is not to be combined with any other craigslist promotion.

FMC Brake Lathe with complete for drums and rotors (Huntingtion) $750

2009-11-11T15:17:19-05:00

FMC Brake lathe for drums and rotors

call Drew
516-509-8008

Scaffold Ladders (Sales/Rentals) Netting Staging (Plainview) $10

2009-11-11T15:05:54-05:00

Approved Ladder and Scaffolding has been serving the climbing community since 1954. We have just moved into our �New� 20,000 square foot warehouse located at 163 Dupont Street, Plainview, NY 11803. 1/8th mile off of the L.I.E. @ EXIT46n (Sunnyside Blvd.) Not only are we the leaders in scaffold sales, rentals, erections/dismantles, we are also a major distributors of Waco, Vanguard, Knaack, Louisville, Bil-Jax, DBI Sala/Capital Safety, Titan Ladder and Staging, Alumapole, Strongman Building Products and Sinco Safety Netting. All our pricing and estimates are with our customer�s best interest in mind.

For a limited time I would like to offer a 10% discount to anyone whom calls me and mentions this add. You can apply this discount to ladders, scaffolding and truck or van equipment sales. This special deal ends 11/16/09 at 4pm. Any question please calls the shop at 516-781-7310 and ask for Frank.

8) 2' clamps used twice (merrick) $15

2009-11-11T15:04:08-05:00

these clamps were used twice to mount crossword puzzles on boards and have been in my toolbox for 10 years.

Delta Uni-saw + much more. (Hauppauge,NY) $1500

2009-11-11T14:53:40-05:00

Delta Uni-saw with Bisamyer extention table able to cut up to 52" length. Never used bought for business that never got off the ground,has about 2 hours running time,complete and utter sacrifice, moving or I wouldn`t sell.Paid 3,000.00 with tax,let you steal it for 1,500.00 not a penny less.Runs on 220 amps,best quality table saw for the money by far.Also have commercial vac set up for the saw,paid 350.00 plus tax, as new as the saw,steal for 200.00. Also will throw in or sell a variety other tools as part of deal

Lets talk

1/2" drive socket and rachet set (merrick) $175

2009-11-11T13:43:50-05:00

this set has SK sockets and a Husky rachet. it is in excellent shape with no ware on the sockets. In my career as a transmission mechanic I very rarely used a half inch set
the price is good but i will talk to anyone with a decent offer

ammco brake lathe (medford) $900

2009-11-11T11:26:08-05:00

good condition w/ adapters call mike 607-765-4880

★SNAP ON TOOLSDIAGNOSTIC METERMULTIMETER★ (★CAN DELIVER★) $50

2009-11-11T09:18:28-05:00

UP FOR SALE IS A USED BUT NOT ABUSED DIAGNOSTIC MULTIMETER. ALL THE CONNECTORS & LEADS ARE IN GOOD SHAPE. COMES WITH THE 50 AMP SHUNT FOR CHECKING AMP DRAW.
IT CAN DO DWELL, TACH, AMPS, VOLTS & OHMS.
I PAID OVER $400 FOR IT, BOUGHT IT NEW, BUT IT HAS BEEN SITTING AROUND FOR THE LAST COUPLE OF YEARS, SO IT HAS TO GO.

CELL/TXT (718)208-6712
PHONE (631)731-1709

★SNAP ON TOOLS SCANNER ACCESSORIESCABLESADAPTERS*KEYS★ (★CAN DELIVER★) $200

2009-11-11T09:16:29-05:00

I HAVE A BUNCH OF ADAPTER, KEYS & CABLES AVAILABLE FOR THE MODIS, MT2500 (BRICK), ETHOS:

-KEYS: S-27, S-28, S-33, S-44, K-5A, K-9........ THEY LIST FOR $21 EACH, MY PRICE $10 EACH

-ADAPTERS: TOYOTA-2, NISSAN-1, NISSAN-2, HYUNDAI-2, MULTI-1, MULTI-2, MERCEDES-2A, JEEP-1, CHRYSLER-1, CHRYSLER-2......... THEY LIST FOR $42 EACH, MY PRICE $15 EACH

-CABLES:
-DATA CABLE MT2500-5000....LISTS FOR $45, MY PRICE $20
-VT100 PRINTER CABLE MT2500-500....... LISTS FOR $106, MY PRICE $40
-3 PIN TRANSDUCER CABLE EAX0024B10A...... LISTS FOR $92, MY PRICE $40
-CHANNEL 2 LEADS 06-03122A.... LISTS FOR $36, MY PRICE $15
-BMC-BANANA SCOPE ADAPTER FOR LOW-AMP PROBE EETA308A6.... LISTS FOR $44, MY PRICE $15

OR $200 TAKES THE WHOLE LOT!! WOW!! $900 WORTH OF STUFF !!

CELL/TXT (718)208-6712
PHONE (631)731-1709

RENT MY EQUIPMENT (NASSAU BALDWIN)

2009-11-11T08:46:09-05:00

I HAVE A DUMP TRAILER 6 X 10 THAT YOU CAN RENT AT YOUR HOME OR JOB SITE
WILL DELIVER OR YOU PICK UP

I HAVE A 6 X 12 FLAT OPEN TRAILER YOU CAN RENT NEED 2" BALL OR 2' RECEIVER

RENT MY WHEELBARROWS, THATCHER, PLUGGER, EDGER, TRIMMERS, BLOWERS, WEEDWACKERS, SPREADERS, LAWNMOWERS

BY THE HOUR -- PICK UP IN BALDWIN OR WE WILL DELIVER LOCALLY
RENT MY LOGSPLITTER, IT TRAILERS
RENT CHAIN SAWS OR ANY OTHER KIND OF HAND TOOLS
CALL MARK AT 516-860-5226

Ingersoll-Rand 1 inch Heavy Duty (BOHEMIA) $350

2009-11-11T08:45:38-05:00

FOR SALE IS A �Ingersoll Rand 285B-6
�1,475 ft./lbs. maximum torque.
�Superior balance, angled-down exhaust.
�High-efficiency 6-vane air motor.
�3-Position power regulator.
�Free Speed: 5,000 rpm.
�Average Air Consumption: 10 cfm.
�Air Consumption @ Load: 37 cfm.
�Min. hose size: 1/2 NEW IN CASE
WITH SOCKETS NEW NEW NEW!!!!!!!!! please call 631-294-5663

ladder rack extends over cab & pick up bed (baldwin) $80

2009-11-11T08:42:39-05:00

call 516-860-5226 no pics come see it

CAPACITOR TESTER SUPCO. MFD-10 (L.I.) $80

2009-11-11T07:26:36-05:00

This is a brand new in factory sealed package. It is used to test starting caps. & motor run caps. in A/C cooling, refrigeration units, & any motorized equipment. It tests from 0.01 to10,000 mfd capacitors. It retails for $125.00 + tax. Thanks for looking. Call John.

SUPCO. Mega Meter M-501 new in box. Checks motor shorts up to 1000v (LI. NY.) $150

2009-11-11T07:25:10-05:00

This meter is brand new never used. It runs on two D cell batteries & comes in a hard plastic carry case. The meter lists for $225.00 plus tax at supply houses. It is used to test all kinds of AC. motors for shorts in the insulation for the internal winding. This includes A/C compressors. Call ( 7 - DAYS )

Industrial Bridge Saw for Marble and Granite (cedarhurst)

2009-11-11T07:21:54-05:00

We are a Marble Fabrication outfit in the five towns long island area. We currently are restructuring our shop and need to make some room for other machines. We are currently offering for sale an Industrial Size Bridge Saw, including all hardware and the cutting bed. The machine is approx 10 years old, extremely well maintained and is in great working condition. See Photos below. Price is negotiable. Please call Mario Sr. at 516-371-4307 with any questions or quires

Demolition Hammer Used Once (Suffolk) $625

2009-11-11T06:06:11-05:00

BOSCH DEMOLITION HAMMER SDS , USED ONCE, EXCELLENT CONDITION , 18" BULL POINT , 18" FLAT CHISEL

$625.00

Call 631-492-0150

10" Miter Saw W/ Stand (Suffolk) $250

2009-11-11T06:03:48-05:00

10" HITACHI MITER SAW WITH STAND , REFURBISHED, EXCELLENT CONDITION

$250.00

CALL 631-492-0150

TORO CCR 2450 SNOWBLOWER (BRENTWOOD) $425

2009-11-10T23:18:04-05:00

MUST GO BRAND NEW NEVER USED TORO CCR 2450 R-TEK ENGINE 20" WIDTH
MOVING TO AZ ASKING $425
CALL AFTER 7PM ASK FOR TOR
631 219 3849

craftsman saw (centereach li) $60

2009-11-10T23:07:17-05:00

miter saw..gd cond..10"...w/dustbag..leave #..exit 62lie

Black & Decker 2-in-1 Cordless Trimmer/Edger (Nassau County) $45

2009-11-10T22:12:15-05:00

Black & Decker 18 Volt Cordless Trimmer and Edger. Includes 2 rechargeable batteries and charger. Extra string. $45. cash only.
Model # NST2018
Includes two 18 Volt batteries so you never have to stop half way through your job
Patented gear drive transmission amplifies motor torque for increased cutting power and performance
Instant start trigger means no more frustrating pull cords
Two-tools-in-one: trimmer easily converts to edger to cut along sidewalks and driveways for a clean, manicured look
Lightweight and balanced design for comfortable use

BAD DOG -DOUBLE HEADED NIBBLER (Malverne , Long Island) $90

2009-11-10T22:09:50-05:00

Hardly Used..BAD DOG...DOUBLE HEADED NIBBLER in original blue metal case.Check price and application on line..

three 1" spline hammer drill bits,made in Denmark (levittown) $50

2009-11-10T20:52:47-05:00

1" x 16". brand new, made in Denmark,

I am located in Levittown, Long Island 11756 ( Exit 28N of the Southern State Parkway) near Wantagh Ave. .Can pick up Mon through Fri after 5 PM, and Sunday all day.

If you still see this ad, it is available. Once it is sold, ad will be immediately removed.

6 FOOT WOODEN STEP LADDER (EAST NORTHPORT) $20

2009-11-10T20:35:09-05:00

This solid wood stepladder has been used but not abused, always kept either in the garage or the basement, it hasn't seen weather. Homeowner quality with a 200 pound capacity, although I can testify that my 235 pounds have been on it many times. Gift of a longer ladder puts this one up for sale. Pictures as soon as I have enough sense to put the memory card in the camera before taking pictures.

snap on scanner

2009-11-10T20:10:09-05:00

Hi, I have a snap on scanner for all OBD2 cars and trucks. In great condition.

best offer

call 516-695-0980

snap on tool (hicksville)

2009-11-10T20:05:38-05:00

Snap on air hammer in great condition.

best offer

call 516-695-0980

Husqvarna 340-350 Repair Manual (Northport) $25

2009-11-10T19:55:48-05:00

New Husqvarna Workshop manual for 340-345-350-346-351, and is also for the 353 chainsaw's. Clean no grease or dog ears.

Greenlee Hydraulic Bender #880 (Queens/Nassau) $1200

2009-11-10T19:48:59-05:00

Greenlee Hydraulic Pipe or Rigid Conduit Bender #880.
Used twice comes with bending protractor and custom cart.

For more info call email: mg@markhowardgroup.com

MATCO RAT FINK TOOL BOX w/HUTCH (HICKSVILLE) $4000

2009-11-10T19:45:12-05:00

Big Daddy Roth Limited Edition Mint/new condition. Size of bottom box: 57" wide x 25" deep x 45" high. Hutch size is: 57" wide x 25" deep x 23" high.
All new drawer liners and tool box cover still new in box.
Original purchase price $6,800.
Pick Up Only (possible free delivery within 10 miles)

NEW ELECTRIC OR HAND TOOLS-NEW ELECTRIC DRILLS/CORDS (ROOFING HAND OR HEAVY TOOLS)

2009-11-10T18:59:59-05:00

ELECTRIC TOOLS, ELECTRIC CORDS, HAND TOOLS AND ROOFING TOOLS, SHOVELS, RAKES,STORE DISPLAYS, STORE EQUIPMENTS, 4 WAYS, MULTIPLE MERCHANDISE FLOOR DISPLAYERS, ALL KIND OF TOOLS AND TOOL BOXES,STORE SHELVE HOLDERS(BLACK) pictures are not available,you must come and see it.sorry.!

Heavy Duty Shop Air Compressor (Amityville) $1200

2009-11-10T18:49:00-05:00

This is a real deal air compressor not a Sears home garage compressor. Used in a high end motorcycle shop always oiled drained etc. This unit works as new and is a work horse you will not get better for this price. 10HP and a 100 gallon tank and 3 phase

snow blower (wantagh) $450

2009-11-10T18:48:08-05:00

TROY BUILD SNOW BLOWER 3 YRS OLD .USED MAYBE 5 TIMES.PULL & ELECTRIC START. RUNS LIKE NEW.450.00

Homelite 245 Chainsaw with spare chain and case (north babylon) $100

2009-11-10T18:28:52-05:00

homelite 245 chainsaw with caseI am the original owner of this homelite 245 chainsaw. Included with this is two homelite spare chains ,original case, homelite blade guard and wrench and owners manual. I believe it to be an 18 inch bar. Nice chainsaw, will demonstrate. Used in yard work only......

I also have a homelite 410. If you want a picture let me know, runs good. $175.00

Striping Machine (Mattituck, NY - North Fork) $75

2009-11-10T18:24:55-05:00

Paint Striping machine for sale. Used, but in excellent working condition. For painting
lines (or stripes) on pavement, ie. parking lots, basketball courts, tennis courts. Inverted aerosol spray stripng paint can is
sprayed at pull of lever on handle. Extra cans of paint may be carried in rear tray.

ladders, ladder brackets, pump jacks (long island (exit 44 off LIE)) $100

2009-11-10T17:38:57-05:00

ladders of all sizes, ladder brackets, pump jacks, and many other carpenter, framer equipment, tools, etc. generator

email amillr@hotmail.com or call 708-557-1495 for more info / to see them / prices, etc

Genisys 2007 Scan Tool Kit (mastic) $1000

2009-11-10T17:22:08-05:00

New USA 2007 Domestic,Asian,European and Heavy Duty Standard Starter Kit have all cables BMW ALSO.. New System 3.0 with 1 GB memory OBD II Smart Cable Automated System Test The best value for owners of existing scan tools to update to the latest technology with all the latest improvements..Features and Benefits Powerful Asian Import diagnostics coverage. Asian also includes Pathfinder Troubleshooting Powerful Domestic diagnostics coverage, includes Pathfinder Troubleshooting Current OBD II SSI cable goes away and over 50 SSI�s go away! Sophisticated electronic circuitry in the new OBD II Smart Cable now remember this is used has some wear and tear and has a scratch on screen cover and for $300 more will put in the Mac Mentor if interested please call 631-294-5663 thanks

CRAFTSMAN TOOL LOT (SUFFOLK NY.) $25

2009-11-10T17:04:07-05:00

I HAVE IN LOT CRAFTSMAN 1/4, 3/8, 1/2'' RATCHETS, THREE EXTENSIONS AND A SPARK PLUG SOCKET.ALL TOOLS IN GD WORKING COND THANKS JIM@631 219-2688

Table Saw Skil 10" Model 3400 Woodworking Tool (Kings Park, N.Y.) $155

2009-11-10T17:04:06-05:00

Winter is coming ! Time for indoor projects !
Skil 10" Table Saw, Model # 3400.
Tilt Table.
Bought new for $355.00
Price: $155.00 negotiable.
One Original Owner, used for 2 light projects. Not 'beat up' or 'abused'.
The saw comes off the base, can be mounted on a work bench.
Light enough for most people to move with little difficulty.
Manuals are available from Mfg'r's website.
Works like new.
Includes:
Blade Guard
Cutting Bar
Send eMail with questions, or, Pager Number: 516 648 2197 Ralph if you'd like to see, try it out in person.

Industrial Air Compressor (Baldwin, NY) $600

2009-11-10T16:43:12-05:00

Ingersoll Rand Air Compressor For Sale. 60 Gallon. 135 PSIG. 230 Volts.
Excellent condition. Asking $600.00

Kent KTM-380 Milling Machine (Long Island NY) $350

2009-11-10T16:30:29-05:00

Works perfect. comes with many bits attachements etc. Great Deal !!!! you will need BIG TRUCK TO REMOVE THIS WE HAVE A FORK LIFT TO ASSIST

Snapon tool box for sale or trade (bay shore) $3250

2009-11-10T16:12:57-05:00

im looking to sell my snap on top and bottom tool box. its a KRA, red and in great shape. has cover. no dents or damage. everything works as it should. two sets of keys and original paperwork.
willing to trade for ducati monster or other bikes.
maybe a hot rod or other fun car.
let me know
cash talks too.

Lincoln 185 Precesion TIG Welder (Freeport) $1650

2009-11-10T15:41:41-05:00

LINCOLN PRECISION TIG 185 � FOR SALE $1650

For Sale - Lincoln TIG Welder with:

Torch and Tips
Cart
Full Tank
Foot Pedal
Manual

Barely Used and in EXCELLENT condition!!

Check out the details at http://www.tig185.com/default.asp

Please call with any questions. Thanks. ALAN 516-623-4183

Smith Tow Behind Compressor $1500

2009-11-10T15:03:36-05:00

Smith Tow Behind Compressor 160cfm
V8 Ford Gas engine
Just serviced runs mint
runs 2 90lb jackhammers no problem
Must sell
call 516-779-2449

VINTAGE 30'S H K PORTER BOLT CUTTERS (SUFFOLK NY.)

2009-11-10T14:38:43-05:00

I HAVE A PAIR OF LARGE 34'' BOLT CUTTERS MADE BY HK PORTER OF BOSTON IN GD WORKING COND NICE COLLECTIBLE FOR VINTAGE TOOL COLLECTION OR HEAVY DUTY USE THANKS JIM@631 219-2688

Mastercraft Wet/Dry Hepa vac $250

2009-11-10T13:45:10-05:00

Mastercraft wet/dry hepa vac 12 gallon drum, 12.5 amps, very good working condition New $800 asking $250, Call Amy at 516*960*8071

Ariens 524 Snow Thrower (Melville)

2009-11-10T12:57:49-05:00

Like New Ariens 524 Snow Thrower.

Starts and runs great. Easily folds/compacts to fit in vehicle.

Used only a few times last season!

Originally paid $800

Asking $500 or best offer.

BLACK HAWK BUMPER JACK (LOCUST VALLEY) $259

2009-11-10T12:22:08-05:00

BLACK HAWK BUMPER JACK _____**** $250

* AIR POWERED
* EXCELLENT CONDITION

****NO EMAILS, PLEASE CALL 516-376-8195 *****

BOSTITCH CORDLESS ROOFING NAIL GUN (LOCUST VALLEY) $199

2009-11-10T12:20:26-05:00

BOSTITCH CORDLESS ROOFING NAIL GUN ______**** $199.99

* NEW NEVER USED, BOUGHT AS A BACK UP
* CARRY CASE
* 2 BATTERIES
* CHARGER
* 2 COILS OF ROOFING NAILS

NO EMAILS, PLEASE CALL 516-376-8195

wet saw (suffolk) $300

2009-11-10T12:08:51-05:00

oscar 631-805-2074

Dayton Air Compressor 5 HP 1 single phase 2 state (Freeport NY) $900

2009-11-10T11:45:50-05:00

Dayton 5 HP Compressor
DAYTON 32966A Stationary Air Compressor 2 Stage Motor Running 5 HP. 1 Phase. In like new condition. Located in Freeport.
asking $900.00 Will arrange for local pick up only. 516-376-9389 Jim

4 hand saws (Merrick, long island, NY) $20

2009-11-10T11:24:36-05:00

4 hand saws
24 inches, 20 inches, 13 inches and 6 inches
also 2 blades 12 and 14 inches

Nice large Husky tool box Aluminum diamond plate. (Sayville)

2009-11-10T10:44:45-05:00

Here is a nice Husky tool box. It is diamond plate aluminum. Has top insert, and would be great to throw in the back of your pick up. Best offer.
631-872-4543

REFRIGERANT GAS ANALYZER (SMITHTOWN) $300

2009-11-10T10:44:13-05:00

YOKOGAWA GA500 1 butto hand held 12v DC gas analyzer..New never used in the case ..2600.00 value!!all accessories included..
ID's 134a/12, 22, HC air and others 631 4334938

AC refrigerant leak detector..Yokogawa h-10pm (St James) $300

2009-11-10T10:38:09-05:00

new in the box never opened,,Yokogawa H-10PM all refrigerant leak detector...800.00 list 631 4334938

2009 Yamaha Grizzly 350 IRS 4X4 pair (NYC - Long Island) $4400

2009-11-10T10:24:58-05:00

Never been in deep mud or water, just trail riding. They are both perfect mechanical shape with no issues. // rear racks, independant suspension (IRS). // Take a look at all the pics. Cost over $6000 new each, still run and look like new. BOTH 2009's (10 months old). // The green one has 95 mils and the black one has 93 miles on it. // $4400 for the pair / $2200 each. // I have a pair 2009 Yamaha Grizzly 350 4X4 4 wheelers (his and hers) for sale. // These are all current on their service and have never been damage, wrecked, or abused. // Both have the same specs: 350, 4X4, WARN Yamaha winch front. // The black one has custom purple rims and racks (can be painted if you don't like purple). // The VIN numbers are as follows: 5Y4AH23Y69A002893 AND 5Y4AH23Y39A004018.

Multiquip GAW 180HE Welding Generator (New Hyde Park) $1750

2009-11-10T10:24:49-05:00

Multiquip GAW 180 HE 180 amp welding generator for sale. This Generator sells for $3,500 new. Some specs are as follows:

Arc force control allows the operator to fine tune DC current during low voltage welding conditions and helps prevent electrodes froms sticking during short arc length welding.

� Ideal for job site and remote-area service applications

� Produces 50-180 amps for DC welding, 3kW output to power AC tools.

� Operator can draw AC power and weld simultaneously

� Honda GX340 gasoline engine

� Permanent magnet alternator-significantly reduces overall weight compared to other welders in its class

Practically new, $1,750. This welder is on a cart with wheels, while the one in the picture is not.

The generator is located in New Hyde Park. It can be picked up, or delivered for a small fee.

Also available are a large band saw, 20" drill press, Chop Saw, 3 ft belt grinder, mig welder, various gas tanks, and a forklift.

80gal Ingersol Rand Compressor (lynbrook) $1100

2009-11-10T09:25:25-05:00

80gal Ingersol Rand,in good condition,3 phase,230 volts,good for small shop,call 347-387-0735 for more details.

★SNAP ON TOOLSDIAGNOSTIC METERMULTIMETER★ (★CAN DELIVER★) $50

2009-11-10T08:41:23-05:00

TOOLS FOR SALEGREAT CONDITION (SUFFOLK COUNTY, LI)

2009-11-10T08:18:15-05:00

FISH TAPE GARDNER BENDER 20 FT $10.00-NEVER USED

THREE TREE SAWS-GREAT CONDITION-SHARP $10.00 EACH

MAKITA CORDLESS DRILL 9 VOLT, CASE BATTERY AND CHARGER $25.00-GREAT CONDITION

***WILL CONSIDER ALL REASONABLE OFFERS**
631-744-4829

HAND TOOLS FOR SALE (SUFFOLK COUNTY,LI)

2009-11-10T08:08:38-05:00

HAND TOOL ASSORTMENT

SEE PICTURE

MAKE BEST OFFER

631-744-4829

Omal Hinge and Boring Machine (Machine E) (Bohemia, Long Island) $1000

2009-11-10T07:36:03-05:00

Omal Hinge and Boring Machine (Machine E) - Single Phase (Like New) - $1000

We are located in Bohemia, Long Island

2" Pony Spring Clamp w/ Protective Handles & Tips 3202-HT

2009-11-10T07:34:40-05:00

Qty 85 - 2" Pony Spring Clamp w/ Protective Handles & Tips 3202-HT

#2 Grip Clip. 2-inch opening capacity, 6-inch jaw length.
Has rubber protective caps on the handles and tips.
Product #: 3202-HT

$1.25 Each Clamp

Craftsman 21" Front Drive 6.5HP Lawnmower (Farmingville, NY) $125

2009-11-10T07:28:32-05:00

For sale is a Craftsman 21" lawnmower. This lawnmower has been used for only 1 season but was bought a few years back. The gas has been taken out so there are no problems. We put some gas in the other day and it started right up. The blades are still in great condition. This lawnmower is front self propelled and has a 6.5 HP engine. This lawnmower will always start on the first pull. Take a look at the pictures below but this lawnmower was purchased for $400 at Sears a few years back. You are getting a great value. Come pick it up today, if you are interested contact me and I will get back to you right away. Thanks.

High Quality Woodworking Tools For Sale

2009-11-10T07:25:12-05:00

- Bostitch Model HP118K - 23 Gauge Headless Pin Nailer Kit with Case (Like New) - $85

- Porter Cable Tiger Saw Model 741 With Case (Excellent Condition) - $60

- DeWalt Model DW 411 1/4" Sheet Heavy Duty Palm Grip Sander - $30

- Hitachi 7 � Inch Circular Saw Model C7SB-C8 With Case - $40

- Kalamazoo Industries, Inc. Model K-10 Cut-Off Abrasive Saw / 220V - $350

Rolling Scaffold Set-Up (Bohemia, Long Island) $200

2009-11-10T07:13:33-05:00

Rolling Scaffold Set-Up

QTY 2 Vertical Frame 5' Wide x 6'7" High Ladder Frame Scaffold with Double Ladders

QTY 4 Scaffolding 8" Locking Casters Polyurethane Wheels

Qty 6 Southern Yellow Pine Scaffold Grade Board
2� x 10� x 10 ft Laminated Plank

Qty 2 Steel Scaffold Cross Bracing

Excellent Condition

Color is Dark Blue

All of the items above:
Price $200.00

Virutex C015L Laminate Slitter CO15L $80

2009-11-10T07:12:21-05:00

Virutex C015L Laminate Slitter CO15L

Cuts strips 1/2" - 4.3" wide. Hand-held portable unit. Strip cutter for plastic laminates and veneers.

Delta Jobsite Steel JoBox / Security Tool Box: Model 654-940

2009-11-10T07:11:25-05:00

Delta Jobsite Steel JoBox / Security Tool Box: Model 654-940

Heavy-Duty Steel Jobsite Tool Box

16-gauge steel body construction

Recessed side handles for convenient transportation

Steel Box has recessed retainers for Two security locks

Safety Chest Dimensions:
Overall � 48� Width x 24� Depth x 27 Height

Color: YELLOW

Price: $250.00

Craftsman Portable/Handy Compressor (Hempstead)

2009-11-10T07:04:08-05:00

This Compressor is very easy to handle has wheels and looks like new. Craftsman 125 PSI, 1HP motor with 12 Gallon capacity of storage air, that makes it easy to carry and since electric motor is only 1 HP very ecconomical in electricity consumption. The Compressor will be yours for $ 135 only if you call me on (516) 754 5427

Metal Ramps save time and money (Nassau) $25

2009-11-10T06:50:58-05:00

With these Metal Ramps you will save time and money changing your car oil. Simply the pair of Metal Ramps will be yours for $25 if you call (516) 754 5427.

DEMOLITION HAMMER USED ONCE (SUFFOLK) $625

2009-11-10T05:54:40-05:00

BOSCH DEMOLITION HAMMER SDS, 18" BULL POINT , 18" FLAT CHISEL , USED ONCE
EXCELLENT CONDITION

$625.00

CALL 631-492-0150

HITACHI 10" MITER SAW W/STAND (SUFFOLK) $250

2009-11-10T05:52:22-05:00

HITACHI 10" MITER SAW WITH STAND, REFURBISHED, EXCELLENT CONDITION
$275.00

CALL 631-492-0150

New (not recondition) Dewalt (dck655x) Combo tools set (Mid-LongIsland) $425

2009-11-10T00:05:37-05:00

Brand New ( not refurb ) dewalt 6pcs 18V combo set. (DCK655x)
Leave your name and # for contact. Serious only
Free delivery local or meet halfway
Lowball will be ignore. Open check before you pay, cash only (milwaukee, makita, bosch, hilti, dewalt, craftman, ryobi power tools)

GREAT CHRISTMAS GIFT.

INCLUDES:

DCD950 XRP 1/2" 18V hammerdrill/drill/driver
DC390 XRP 18V circular saw
DC385 XRP 18V reciprocating saw
DC825 18V impact driver
DC411 18V cut-off tool
DW919 18V flexible floodlight
1 hour NiCd/NiMH/Li-Ion Charger
(2) 18V XRP batteries
360� side handle
carbide tipped circular saw blade
type 1 and type 27 guards
wrench
backing flange
(1) type 27 wheel
2-position side handle
contractor bag

Hard hats - Construction (Massapequa) $3

2009-11-09T23:30:35-05:00

Hard hats
Like new
A few to chose from

Email: ArkohnCorp@aol.com

Thanks for looking
718-662-4193

craigslist | tools in long island

Spartan Square One Stripping Compound (levittown) $1

Wet Lines whole setup-best offer (Ronkonkoma)

welder Shindoiwa (Ronkonkoma) $7000

gas saw Makita 14" (Nassau)

Jet Woodworking Equpit. (Nassau)

Misc equipt 4 sale (Nassau)

Air Compressor "Porter Cable" with 50' flex hose (Lindenhurst, Long Island) $100

@@@@@@@SKID STEER (LINDENHURST)

★SNAP ON TOOLS*BATTERY LOAD TESTER*6V 12V★ (★CAN DELIVER★) $50

!!!!!DIESEL GENERATORS 5-10 (LONG ISLAND)

!!!DIESEL GENERATOR 60 KW (LONG ISLAND)

@@@@@@3kw diesel generator (long island)

KEROSENE HEATER, 85,000 BTU. (LONG ISLAND) $225

Wooden Ladders -- CHEAP! (Southwest Nassau County) $30

SDS DEMOLITION HAMMER USED ONCE (SUFFOLK) $625

MITER SAW 10" (SUFFOLK) $250

plumbing (islip)

JACK BAR (SHOREHAM) $25

Homelite 4400W generator (suff) $200

New Chain Saw 18 Inch Craftsman (West Babylon) $100

Marlow Pump (Ridge) $180

Ridgid gas air compressor (BRAND NEW) (wantagh) $650

Delta 10" Table Saw (Islip) $650

Roof rippers (bayshore ) $10

Lincoln AC-225 Arc Welder (Long Island) $225

RADIAL ARM SAW (plainview) $200

***WOW!!- Like New Radial Arm Saw with Stand.. (Select salvage, Hicksville) $249

Black & Decker Hedge Trimmer (Long Beach) $15

Alumapole (New) 2 - 24' Poles, 2 - Pump Jacks, 2 - Benches, 2 - Braces (Plainview) $999

****FMC Brake Lathe with complete for drums and rotors**** (Huntingtion) $750

Scaffold Ladders (Sales/Rentals) Netting Staging (Plainview) $10

8) 2' clamps used twice (merrick) $15

Delta Uni-saw + much more. (Hauppauge,NY) $1500

1/2" drive socket and rachet set (merrick) $175

ammco brake lathe (medford) $900

★SNAP ON TOOLS*DIAGNOSTIC METER*MULTIMETER★ (★CAN DELIVER★) $50

★SNAP ON TOOLS SCANNER ACCESSORIES*CABLES*ADAPTERS*KEYS★ (★CAN DELIVER★) $200

RENT MY EQUIPMENT (NASSAU BALDWIN)

Ingersoll-Rand 1 inch Heavy Duty (BOHEMIA) $350

ladder rack extends over cab & pick up bed (baldwin) $80

CAPACITOR TESTER SUPCO. MFD-10 (L.I.) $80

SUPCO. Mega Meter M-501 new in box. Checks motor shorts up to 1000v (LI. NY.) $150

Industrial Bridge Saw for Marble and Granite (cedarhurst)

Demolition Hammer Used Once (Suffolk) $625

10" Miter Saw W/ Stand (Suffolk) $250

TORO CCR 2450 SNOWBLOWER (BRENTWOOD) $425

craftsman saw (centereach li) $60

Black & Decker 2-in-1 Cordless Trimmer/Edger (Nassau County) $45

BAD DOG -DOUBLE HEADED NIBBLER (Malverne , Long Island) $90

three 1" spline hammer drill bits,made in Denmark (levittown) $50

6 FOOT WOODEN STEP LADDER (EAST NORTHPORT) $20

snap on scanner

snap on tool (hicksville)

Husqvarna 340-350 Repair Manual (Northport) $25

Greenlee Hydraulic Bender #880 (Queens/Nassau) $1200

MATCO RAT FINK TOOL BOX w/HUTCH (HICKSVILLE) $4000

NEW ELECTRIC OR HAND TOOLS-NEW ELECTRIC DRILLS/CORDS (ROOFING HAND OR HEAVY TOOLS)

Heavy Duty Shop Air Compressor (Amityville) $1200

snow blower (wantagh) $450

Homelite 245 Chainsaw with spare chain and case (north babylon) $100

Striping Machine (Mattituck, NY - North Fork) $75

ladders, ladder brackets, pump jacks (long island (exit 44 off LIE)) $100

Genisys 2007 Scan Tool Kit (mastic) $1000

CRAFTSMAN TOOL LOT (SUFFOLK NY.) $25

Table Saw Skil 10" Model 3400 Woodworking Tool (Kings Park, N.Y.) $155

Industrial Air Compressor (Baldwin, NY) $600

Kent KTM-380 Milling Machine (Long Island NY) $350

Snapon tool box for sale or trade (bay shore) $3250

Lincoln 185 Precesion TIG Welder (Freeport) $1650

Smith Tow Behind Compressor $1500

VINTAGE 30'S H K PORTER BOLT CUTTERS (SUFFOLK NY.)

Mastercraft Wet/Dry Hepa vac $250

Ariens 524 Snow Thrower (Melville)

BLACK HAWK BUMPER JACK (LOCUST VALLEY) $259

BOSTITCH CORDLESS ROOFING NAIL GUN (LOCUST VALLEY) $199

wet saw (suffolk) $300

Dayton Air Compressor 5 HP 1 single phase 2 state (Freeport NY) $900

4 hand saws (Merrick, long island, NY) $20

Nice large Husky tool box Aluminum diamond plate. (Sayville)

★SNAP ON TOOLSBATTERY LOAD TESTER6V 12V★ (★CAN DELIVER★) $50

FMC Brake Lathe with complete for drums and rotors (Huntingtion) $750

★SNAP ON TOOLSDIAGNOSTIC METERMULTIMETER★ (★CAN DELIVER★) $50

★SNAP ON TOOLS SCANNER ACCESSORIESCABLESADAPTERS*KEYS★ (★CAN DELIVER★) $200

★SNAP ON TOOLSDIAGNOSTIC METERMULTIMETER★ (★CAN DELIVER★) $50

TOOLS FOR SALEGREAT CONDITION (SUFFOLK COUNTY, LI)